NEUTRAL SILICONE SEALANT

Product introduction

PRODUCT DESCRIPTION

Silicone Sealant is polydimethylsiloxane as the main raw material, supplemented by crosslinking agents, fillers, plasticizers, coupling agents, catalysts in a vacuum state mixed into a paste, once in contact with moisture in the air will be cured into a tough rubber-like solid material.

PRODUCT COLOR

Silicone sealant has a variety of colors, commonly used colors are black, porcelain white, transparent, silver gray, gray, bronze six. Other colors can be customized according to customer requirements.

PRODUCT CHARACTERISTICS AND USES

Silicone sealant has strong adhesive force, high tensile strength, and at the same time has the characteristics of weather resistance, vibration resistance, and moisture resistance, odor resistance and adapt to large changes in heat and cold. Can achieve most of the building materials Products between the bond, such as dry clean metal, glass, most of the oil-free wood, silicone resin, vulcanized silicone rubber, ceramics, natural and synthetic fibers, as well as many painted plastic surfaces bonding. Good quality silicone glass adhesive in the use of zero degrees Celsius will not occur in the extrusion does not come out, the physical properties of the phenomenon of change.

CONSTRUCTION METHOD

▪ The use of sealant is relatively simple, first with a rag, shovel and other tools to clean up the gap in the cement Mortar, dust and so on. This step is very important, if you do not do a good job cleaning the gap for construction, sealant is prone to bonding is not solid off the problem. Next, the sealant will be installed on the glue gun, according to the size of the caulking gap to the glue gun tip tube cut.

▪ Then we put the plastic tape on both sides of the gap, with the glue gun will be sealed into the gap sealant. Stick plastic tape on both sides of the gap is to avoid construction sealant overflow, stained tiles and other places, resulting in sealant is not good to remove. We use scraper and other tools to fill the sealant compaction smoothing, construction is complete after the plastic tape will be torn off.

▪ Silicone sealant with a glue gun is very easy to glue it out of the bottle, there is no silicone gun, consider using a razor blade to cut the bottle, and then use a spatula or woodchips to apply the foam.

▪ The curing process of silicone sealant is developed from the surface to the inside, different characteristics of the silicone surface drying time and curing time are not the same, so if you want to repair the surface must be in the silicone sealant dry before. silicone sealant is not cured before the cloth or paper towel can be used to wipe off, after curing, it must be scraped with a scraper or xylene, acetone and other solvents to scrub.

▪ Silicone sealant in the curing process will release irritating gases, human eyes and respiratory tract has an irritating effect. Therefore, the product should be used in a well-ventilated environment, to avoid entering the eyes or prolonged contact with the skin (after use, eating, smoking before washing hands). Do not allow children to come into contact with it; the construction site should be well ventilated; if accidentally splashed into the eyes, it should be flushed with water and seek medical attention immediately. Fully cured silicone sealant is not dangerous.