JS WATERPROOF COATING

Product introduction

PRODUCT DESCRIPTION

JS Waterproof Coating is a new type of waterproof material. It is a two- component waterborne building waterproof coating made of building polymer emulsion and special cement as main raw materials and added with other admixtures, so it has the waterproof characteristics of "combining rigidity with flexibility"

PRODUCT FEATURES

▪ It’s convenient for construction, wide range of application, and has obvious advantages to the construction of complex parts.

▪ After it’s solidified, a seamless and complete elastic waterproof layer is formed to improve the waterproof and impermeability of architectural engineering, which can't be achieved by coiled material Products.

▪ coating film has high strength and extensibility, and has strong adaptability to cracking or expansion of base.

▪ It is convenient to maintain, and the original waterproof effect can still be achieved only by local maintenance of damaged parts.

PRECAUTIONS

▪ If the coating (especially the base material) has precipitation, it should bestirred evenly at any time.

▪ coating should be as uniform as possible, without local deposition, and it is required to roll and brush several times to try to see no bubbles between the coating and the base, and to bond tightly.

▪ Each layer of coating must betaken according to the specified dosage, and must not be too thick or toothin. If th final waterproof layer thickness is not enough, one or several layers can be added, and the total number of coatings shall not be less than 3 layers. The time interval between each layershall prevail before a layer of coating is dry and non-sticky (generally need 3-6 hours, low site temperature, high humidity, poor ventilation, dry solid time longer, viceversa).

▪ It is not allowed to construct below 0 ℃ or in rain. It is not suitable to construct in a particularly humid and unventilated environment, which will affect film formation.